Handling Precautions - Fujitsu MB2146-270 Operation Manual

Sop-28p (1.27 mm pitch) header board

2. Checking the Delivered Product

Before using the MB2146-270, confirm that the following components are included

in the box:

* : The footprint of a mass production MCU is prepared on a user's target board, and it mounts there

3. Handling Precautions

Please take note of the following points to ensure that the header board and conversion board are

always used correctly in a suitable environment.

Unlike previous header boards, this product does not use YQPACK manufactured by Tokyo Eletech

Corporation.

As a result, note that you cannot perform evaluation by mounting a mass production MCU in the con-

version board.

• SOP-28P (1.27 mm pitch) Header board

• Signal line conversion board for SOP-28P (1.27 mm pitch) *

• Operation manual (English version, this manual)

directly.

• Do not apply excessive force to the conversion board mounted on the user system when the

header board and conversion board are connected.

• Take care not to apply excessive force to the conversion board mounted on the user system

when connecting or disconnecting the header board and conversion board.

: 1

Table of Contents