Fujitsu PRIMERGY LTO2 User Manual page 61

3.2.2 Data Write Protection
To make the data cartridge write-protected, slide the write-protect switch to the right.
Write-protect switch
3.2.3 Storing the Data Cartridge
When storing the data cartridge, follow the notes below:
• Make the storage area clean, and comply with the usage rules.
• Put the data cartridge in the operation environment for more than 24 hours before using it. This
period is required to accustom the data cartridge to the environment.
• When storing data in a data cartridge for a long time, store the data cartridge in its plastic case and
keep it under the following temperature and humidity conditions:
Temperature
Humidity
Maximum wet-bulb temperature
Write-protect
16 - 32 °C
20%RH - 80%RH (non-condensing)
Below 26 °C
3 About the Data Cartridge
E
61