Cleaning; Cleaning Cartridge That Can Be Used - Fujitsu PRIMERGY LTO2 User Manual

Tape drv lto2 ultrium2 200gb

Hide thumbs Also See for PRIMERGY LTO2:

Table of Contents

Cleaning

This chapter explains cleaning for this product.

Head cleaning will be performed automatically when a cleaning cartridge is inserted into this

product.The cleaning cartridge is ejected when cleaning operations are complete.

Cleaning takes about three to five minutes.

This product uses a magnetic head to write and read data. If soiled with dust or dirt, the

magnetic head does not read or write data correctly. Also, it could reduce the life of the data

/ data cartridge, scratch the magnetic surface of the tape, or cause other kinds of trouble

making it impossible to use. To avoid trouble, clean the head occasionally using a cleaning

cartridge.

4.1

Use the following cleaning cartridge for this product.

Ultrium Universal Cleaning Cartridge (LTO FB UL-1 CL UCC E)

The CLEAN LED blinks on when cleaning is required. If this LED is on, insert a cleaning

cartridge into the drive to clean it.

The cleaning cartridge can be used 50 times maximum. Five years after purchasing the

cleaning cartridge, replace it with a new one even when it is used less than 50 times.

If the CLEAN LED turns on and the cleaning cartridge is ejected immediately (approx. 40

seconds) after it is inserted, replace the cleaning cartridge with a new one.

Product name

Supplier

FUJI PHOTO FILM Co.,LTD.

4 Cleaning

Table of Contents

Table of Contents