Fujitsu PRIMERGY LTO2 User Manual page 70

Classific
No
ation
4
Cleaning
5
6
Data
cartridge
manage
ment
7
70
Check Check item
❑
When the
inserted
cleaning
cartridge is
automatically
ejected and the
CLEAN LED is
on, is the
cleaning
cartridge
replaced?
❑
Is the
commencing
date for use
written on the
data cartridge?
(Approximate
replacement:
after one year)
❑
When the
CLEAN LED
turns on
immediately
during backup,
or in the case of
data cartridge
eject delay/
unloadable, is
the data
cartridge
replaced?
❑
Is the data
cartridge
inserted right
before backup
and ejected
right after
backup, and
stored in its
case?
Description / tasks (*)
When the cleaning cartridge is automatically ejected
after approx. 40 seconds and the CLEAN LED is on,
the cleaning cartridge is run down.
* In this case, replace the cleaning cartridge with a
new one.
The data cartridge is a consumable part. Worn data
cartridge will cause troubles such as tape surface
damage, dirty head, many media errors, etc. To avoid
miss-backup due to worn data cartridge, replacement
is required for Fujitsu authorized product at the
earlier timing of either after one year of use or after
being used 1000 times.
* In this case, replace the cartridge with a new one. It
is recommended to use the Fujitsu authorized data
cartridge.
When the data cartridge life is over, it detects head
dirt during backup and the CLEAN LED tends to
turn on or blink. Also, ejecting the data cartridge
may take a long time, or the data cartridge may be
unloadable.
* In these cases, replace the data cartridge with a new
one regardless of the number of times/period that
used, and see how it works. It is recommended to
check the number of times/period that used of other
data cartridges and replace them all since the
cartridges close to the end of the replacement cycle
may have serious damage.
The data recording surface of the data cartridge is
exposed in this product and contacts the head under
tension. If this situation continues for a long time, the
effect of suspended particles of dust and tension on
the data cartridge may cause reduction of data
cartridge life, errors during backup, or failure in this
product, etc.
* Insert the data cartridge before use, and eject right
after use and store in its case.