Important Safety Information - Hoshizaki Reach-In Instruction Manual

Professional series refrigerated kitchen equipment
Hide thumbs Also See for Reach-In:
Table of Contents

Advertisement

Important Safety Information

Throughout this manual, notices appear to bring your attention to situations which could
result in death, serious injury, or damage to the unit.
WARNING
CAUTION
IMPORTANT
This unit should be destined only to the use for which it has been expressly
conceived. Any other use should be considered improper and therefore
dangerous. The manufacturer cannot be held responsible for injury or damage
resulting from improper, incorrect, and unreasonable use.
To reduce the risk of death, electric shock, serious injury, or fire, follow
basic precautions including the following:
• Make sure the power switch is in the "OFF" position before making any
electrical connections, plugging in, or unplugging the unit to reduce the risk
of electric shock.
• Electrical connection must meet national, state, and local electrical code
requirements. Failure to meet these code requirements could result in death,
electric shock, serious injury, fire, or severe damage to equipment.
• This unit requires an independent power supply. See the nameplate for proper
voltage and breaker/fuse size. Failure to use a proper breaker or fuse can
result in a tripped breaker, blown fuse, or damage to existing wiring. This
could lead to heat generation or fire.
• THIS UNIT MUST BE GROUNDED. Failure to properly ground this unit could
result in death or serious injury. Corded Units: Corded units are equipped
with a 3-prong grounding plug to reduce the risk of potential shock hazards.
It must be plugged into a properly grounded, independent 3-prong wall outlet.
If the outlet is a 2-prong outlet, it is your personal responsibility to have a
qualified electrician replace it with a properly grounded, independent 3-prong
wall outlet. Do not remove the ground prong from the power cord and do not
use an adapter plug.
• Do not use an extension cord.
• Do not use a unit with a damaged power cord. The power cord should not be
altered, jerked, bundled, weighed down, pinched, or tangled. Such actions
could result in electric shock or fire. To unplug the unit, be sure to pull the
plug, not the cord, and do not jerk the cord.
• To reduce the risk of electric shock, do not touch the plug or power switch
with damp hands.
• This unit should be disassembled or repaired only by qualified service
personnel to reduce the risk of electric shock, injury, or fire.
• Do not make any alterations to the unit. Alterations could result in electric
shock, injury, fire, or damage to the unit.
Indicates a hazardous situation which could result in death or
serious injury.
Indicates a situation which could result in damage to the unit.
Indicates important information about the use and care of the
unit.
WARNING
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Roll-inPass-thruRoll-thru

Table of Contents