Table of Contents
Advertisement
C. Cabinet Temperature
1. Temperature Display
• The cabinet temperature is displayed on the control panel. See Fig. 11. The display
default is °F, but it can be changed to read °C. To change, see "II.C.3. Changing the
Temperature Display Scale (°F or °C)".
• The cabinet temperature is updated every 20 seconds.
2. Adjusting the Temperature Setpoint
The temperature setpoint is the value for the average cabinet temperature. The
temperature differential for the compressor to turn on and off is ±3°F (±1.7°C) of the
temperature setpoint. For example, for a refrigerator temperature setpoint of 36°F (2°C),
the compressor comes on at 39°F (3.7°C), and the compressor goes off at 33°F (0.3°C).
If necessary, adjust the temperature setpoint as follows:
1) Press and hold the up and down buttons simultaneously for 3 seconds. The current
temperature setpoint will be displayed.
2) To change the temperature setpoint, press the up or down button until the desired value
is displayed.
• Refrigerators: The temperature setpoint is adjustable between 36°F and 50°F (2°C
and 10°C). The factory default for refrigerators is 36°F (2°C).
• Freezers: The temperature setpoint is adjustable between -10°F and 25°F (-23°C and
-4°C). The factory default is -3°F (-19°C).
3) Press the "ENTER" button to set the value and view the next setting. If no change in the
value is desired, press the "ENTER" button repeatedly until you return to the normal
display. If you do not cycle through the menu and no button is pressed in 15 seconds,
the display returns to normal and the temperature setpoint remains unchanged.
3. Changing the Temperature Display Scale (°F or °C)
To change the display scale, follow the steps below.
1) Press and hold the up and down buttons simultaneously for 3 seconds. Press the
"ENTER" button until the F or C temperature display scale is displayed.
2) To change the temperature display, press the up or down button until the desired scale
is displayed. The factory default is °F.
3) Press the "ENTER" button to set the value and return to normal display mode. If you
do not return to the normal display mode and no button is pressed in 15 seconds, the
display returns to normal and the temperature display remains unchanged.
16
Advertisement
Table of Contents
