Table of Contents
Advertisement
Drive number select (1:#1,2:#2) ?
(2)
Select a drive number and press Enter. The following message will appear.
Interleave number (1/1-8) ?
(3)
Select an interleave number (usually 1) and press Enter. The following display will
be displayed.
Unlock Format select (1:no,2:yes) ?
(4)
Select whether or not the HDD has an unlock format and press Enter. If the system
unit contains a JVC HDD, select yes. If the system unit contains a Conner HDD,
select no.
The following message will appear.
[ HDD TYPE ] : CYLINDER = xxxx
[ HDD TYPE ] : HEAD
[ HDD TYPE ] : SECTOR
[ WARNING : Current DISK data will be
Press [Bad track number (CCCCHH)] key ?
(5)
Enter the cylinder and head number of the bad tracks on the HDD and press Enter.
The cylinder number is represented by CCCC and HH is the head number. If the
HDD does not have any bad tracks, press Enter. The following message will appear
and all the cylinders in the hard disk will be formatted and checked.
[[cylinder, head = xxxx xx]]
(6)
After formatting the hard disk, execute the verify check program by pressing Enter.
When the verify check program is completed, the following message will appear.
Format complete
(6)
Press Enter to return to the HARD DISK FORMAT menu.
3.
Good track FORMAT and Bad track FORMAT programs
(1)
When the Good track FORMAT or Bad track FORMAT is selected, the following
message will appear.
= xx
= xx
completely destroyed ]
3-39
Hide quick links:
Advertisement
Chapters
Table of Contents
