Toshiba T2000 Maintenance Manual page 112

(7) Built-in Modem Power
Use this option to supply power to the built-in modem. To conserve battery power,
this option should be set to Off when a built-in modem is not in use.
On
Off
6. OTHERS
(1) Popup
This option enables and disables the Pop-up window.
Enable
Disable
(2) Processing Speed
This option selects the CPU and system bus speeds. Some option cards are depen-
dent on the system bus speed.
High
Low
(3) External FDD/PRT
This option assigns the function of the PRT/FDD port.
Printer
FDD A
FDD B
(4) Printer Port Type
This option sets the printing capabilities of the PRT/FDD port.
Output
Bi-Directional Selects bi-directional operation.
7. TIME & DATE
3-60
Turns on power to the built-in modem.
This is the default setting.
Turns off power to the built-in modem.
Allows you to access the Pop-up window.
This is the default setting.
Disables the Pop-up window.
Selects the high CPU speed.
This is the default setting.
Selects the low CPU speed. This setting makes the T2000 CPU
speeds compatible with IBM PC/AT.
Assigns the port as a printer port. An FDD connected to the PRT/
FDD port cannot be accessed. An internal FDD is assigned as A.
This is the default setting.
Assigns the external FDD as A and the internal FDD as B.
Assigns the external FDD as B and the internal FDD as B.
Selects uni-directional operation.
This is the default setting.