5.
This message is used to select whether or not the HDD status is displayed the screen. The
HDD status is described in Section 3.15. Type in 1 or 2 and press Enter. The HARD DISK
TEST menu will appear.
6.
During the hard disk test, the following message will appear.
HARD DISK TEST
SUB-TEST
PASS COUNT: XXXXX
WRITE DATA: XX
ADDRESS
The first three digits of the ADDRESS number are the cylinder number being tested, the
3-28
: XX
ERROR COUNT: XXXXX
READ DATA
: XXXXXX
STATUS
XXXXXXX
: XX
: XXX