Toshiba T2000 Maintenance Manual page 100

Copy complete
Another copy (1:Yes/2:No) ?
(5) To copy another disk, type 1 and the message in step (1) will be displayed again. If
you type 2, the display returns to the DIAGNOSTICS MENU.
4. DUMP program
(1) When DUMP is selected, the following message appears.
Format type select (0:2DD,1:2D,2:2HD,3:HDD) ?
(2) Select a format type number. Type the number. If 3 is selected, the display will go
to the message in step (5) below.
0:
1:
2:
3:
(3) If 0, 1, or 2 is selected, the following message will appear.
Select FDD number (1:A/2:B) ?
(4) Select an FDD drive number by typing in 1 or 2. The following message will ap-
pear.
Insert source disk into drive A:
Press any key when ready.
(5) Remove the Diagnostics Disk from the FDD and insert a source disk. Press any key
and the following message will appear.
— Max. address —-
Track
(6) Type the track number and press Enter. The following message will appear.
3-48
Displays a dump list for a floppy disk (2DD).
Displays a dump list for a floppy disk (2D).
Displays a dump list for a floppy disk (2HD).
Displays a dump list for a hard disk.
[Track ] = xxxx
[ Head ] = xx
[Sector] = xx
number ??