Toshiba T2000 Maintenance Manual page 50

If an error is detected, refer to Procedure 3.
If an error is not detected, the display is OK.
Procedure 3
Connector Check
The display unit has an LCD module, FL (Fluorescent Lamp), and FL inverter. The LCD module
and FL inverter are connected to the system board with the LCD cable. The LED board (PCB
FT2LEx) is connected directly to the system board. Either or both of these cables may be discon-
nected from the system board.
Disassemble the display unit and check these connectors. Refer to Part 4 for instruction on how to
disassemble the system unit.
System board PJ12
System board PJ9
2-36
LCD module CN1
LCD module CN2
LED board