Stalker 50
2. Without removing the stator, carry out the following checks:
After visually checking the electrical wiring, perform measurements on the loading reel, the pickup (see
chart) and the continuity using the appropriate tester.
If checks on the loading reel, pickup and continuity show abnormalities, replace the stator; otherwise
replace the central unit. Remember that disconnections due to replacement of the central unit must be
done with the engine off.
Specific tooling
020331Y Digital multimeter
1
1
1
2
CHECK ON THE PICK UP
Specification
Red and white cable
RECHARGE COIL CHECK UP
Specification
Yellow and blue cable
CHECK CONTINUITY
Specification
White cable-frame
White cable-engine
Electrical system
Desc./Quantity
90±140 ohm
Desc./Quantity
800±1100 ohm
Desc./Quantity
continuity
continuity
ELE SYS - 47