Characteristics
Capacities
Specification
Fuel tank
Oil mixer tank
Rear hub oil
Electrical system
Specification
Type of ignition
Ignition advance (before TDC)
Recommended spark plug
Battery
Main fuse
Generator
Frame and suspensions
Specification
Chassis type
Front suspension
Front stroke
Front suspension stroke
Rear suspension
Brakes
Specification
Front brake
Rear brake
Wheels and tyres
Specification
Front tyre
Rear tyre
Wheels
Carburettor
CHAR - 10
CAPACITY
Plastic, with a capacity of 6 litres (approximate value) including
Plastic, with a capacity of ~ 1.2 l. (including a ~0.400 l reserve).
ELECTRICAL SYSTEM
Capacitive discharge type electronic ignition, with incorporated
FRAME AND SUSPENSIONS
Welded tubular steel chassis with stamped sheet reinforce-
With coaxial spring and hydraulic shock absorber. Chassis to
BRAKES
Disc D=190 mm with hydraulic control, operated by right brake
Drum D=110 mm with expansion brake shoes, mechanically
controlled by the left brake lever on the handlebars.
WHEELS AND TYRES
Desc./Quantity
reserve of ~ 1.5 l.
Quantity: approx. 75 cm³
Desc./Quantity
high voltage coil
Fixed 17° ± 1
CHAMPION RN2C
12V-4Ah
7.5 A
In alternate current with three output sections
Desc./Quantity
ments
upside-down hydraulic telescopic fork.
73 mm
58 mm
engine support with swinging arm.
Desc./Quantity
lever on the handlebars.
Desc./Quantity
Tubeless 120/90 x -10''
Tubeless 130/90 x -10''
with 3.50x10" wheel rims in light alloy.
Stalker 50