Drum Refresh - Kyocera TASKalfa 7550ci Operation Manual

Background Density Adj.
Adjust the density used when the background of documents is automatically adjusted.
Use the procedure below to set the Background Density Adj..
Copy (Auto)
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance] and then [Next] of Background Density Adj..
3
Press [Change] of Copy (Auto).
4
Press [-3] - [+3] (Lighter-Darker) to adjust background density.
5
Press [OK].
Send/Box (Auto)
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance] and then [Next] of Background Density Adj..
3
Press [Change] of Send/Box (Auto).
4
Press [-3] - [+3] (Lighter-Darker) to adjust background density.
5
Press [OK].

Drum Refresh

Refresh the drum when image blur or white spots appear on images in copies.
NOTE:
Drum Refresh cannot be performed while printing. Execute Drum Refresh after the printing is done.
Use the procedure below to refresh the drum.
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance].
3
Press [Next] of Drum Refresh.
4
Press [Start] to perform Drum Refresh.
5
After Drum Refresh is completed, press [OK] to return to the Adjustment/Maintenance screen.
9-71
Default Setting (System Menu)
9