Text Stamp - Kyocera TASKalfa 7550ci Operation Manual

Text Stamp

When sending, you can display a text stamp on the originals.
NOTE:
This cannot be set when Text Stamp is set in the system settings. For details, see Sending Jobs on
page 9-34.
The items that may be configured are as follows.
Item
Position
Font Size
Style
Font
Color
Density
Display
Pattern
* Registered font sizes are displayed. For details on registering font sizes, refer to System Stamp on
page 9-31.
Use the procedure below to specify the Text Stamp settings.

Text Stamp

Stamp
Off
Keyboard
On
URGENT COPY
Top
Left
Position
Add Shortcut
Status
Selectable positions are [Top Left], [Top Middle], [Top Right],
[Middle Left], [Center], [Middle Right], [Bottom Left], [Bottom
Middle], and [Bottom Right].
Set the font size of the printed text stamp.*
Set the font style of the printed text stamp. [Bold] or [Italic] can
be set.
Set the font of the printed text stamp. [Courier] or [Letter Gothic]
can be set.
Set the color of the printed text stamp. [Black], [Cyan],
[Magenta], [Yellow], [Red], [Green], or [Blue] can be set.
Set the density of the color of the printed text stamp.
Set the display method of the printed text stamp. [Transparent],
[Clipping], or [Overwrite] can be selected.
1
2
3
4
Copies
5
NOTE:
details on registering templates, refer to
9 pt Top Edge
on Top
Black
Stamp on page 9-31
Font Original
Orientation
Cancel OK
6
10/10/2010 10:10
6-39
Detail
Press the Send key.
Place the originals on the platen.
Press [Advanced Setup] and then press [Text
Stamp].
Press [On].
Press [Keyboard] and enter the text string to be
displayed, or select a text stamp from the displayed
templates.
Templates that have been set will appear. For
.
Press [Position] and select the position of the text
stamp.
Sending Functions
6
System