Kyocera TASKalfa 7550ci Operation Manual page 337

Use the procedure below to set the default EcoPrint setting.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select [Off] or [On] for the default.
4
Press [OK].
Toner SaveLevel(EcoPrint)
Select the default Toner SaveLevel(EcoPrint). One of five levels [1] - [5] can be set.
NOTE:
Raising the level reduces toner consumption, but image quality falls.
IMPORTANT: If you want to enable the changed defaults immediately, move to the function screen and press
the Reset key.
Use the procedure below to select the default Toner SaveLevel(EcoPrint).
1
Press the System Menu key.
2
Press [Common Settings], [
SaveLevel(EcoPrint).
3
Select from [1] to [5] for the default Toner SaveLevel(EcoPrint).
4
Press [OK].
High Comp. PDF Image
Select the default quality setting for high compressed PDF files.
The table below shows the available settings.
Item
Compression Ratio Priority
Standard
Quality Priority
Use the procedure below to select the default quality setting for high compression PDF files.
1
Press the System Menu key.
2
Press [Common Settings], [
Comp. PDF Image.
3
Select the default for [Compression Ratio Priority], [Standard], or [Quality Priority].
4
Press [OK].
], [Next] of Function Defaults, [
], [Next] of Function Defaults, [
Compression Ratio is given priority with smaller file size.
Standard quality
Image quality is given priority with larger file size.
] and [Next] of Function Defaults. Press [
9-25
Default Setting (System Menu)
] twice, and then [Change] of EcoPrint.
] twice, and then [Change] of Toner
Description
] twice and [Change] of High
9