Developer Refresh; Laser Scanner Cleaning; Correct Paper Curl - Kyocera TASKalfa 7550ci Operation Manual

Developer Refresh

When the printing is too light or incomplete, even though there is enough toner, refresh the developer.
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance], [
3
Press [Start]. Developer Refresh begins.
NOTE:
Waiting time may be longer when the toner is refilled during developer refresh.
4
Press [OK] after Developer Refresh is complete.

Laser Scanner Cleaning

If white or color streaks appear on images, perform Laser Scanner Cleaning.
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance], [
3
Press [Start]. Laser Scanner Cleaning begins.
4
Press [OK] after Laser Scanner Cleaning is complete.

Correct Paper Curl

Some paper types and paper stored in certain conditions may curl. This feature can be used to correct paper
curling. Normally the service technician performs this operation.
The table below shows the available settings.
Item
Auto
Reduce
Downcurl
Reduce
Upcurl
The procedure is as follows.
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance], [
3
Select [Auto], [Reduce Downcurl], or [Reduce Upcurl].
4
Press [OK].
] and then [Next] of Developer Refresh.
] and then [Next] of Laser Scanner Cleaning.
Corrects based on the machine's default setting.
Corrects downward curling.
Corrects upward curling.
] and then [Next] of Correct Paper Curl.
9-77
Default Setting (System Menu)
Description
9