Setting The Material Parameters - Avery Dennison Monarch 9844 Operator's Handbook Manual

05/08 Rev. AB OPERATOR'S HANDBOOK
9844/9854

Setting the Material Parameters

Use the following three parameters to set the material properties:
Parameter
PRINT PARAMETERS/
Material type
PRINT PARAMETERS/
Material length
PRINT PARAMETERS/
Material width
SYSTEM PARAMETERS/
Light sens
. type
Tab. 1:Important parameters for setting the material properties.
Refer to the "Info-Printouts and Parameters" section on your CD-ROM for
more information on setting parameters.
Function
Sets the material type (perforated or
endless)
Sets the material length
Sets the material width
Sets the sensor type (reflex or transmission)
based on the material (marks or
perforations)
2-15
Setup