Displaying Total Number Of Copies - Toshiba 120/150 Operator's Manual

4
Select the desired parameter using the copy quantity (
number will blink on the right of the display.
Program
No.
1 Auto clear time
2 Preheat mode
3 Auto power shut- off timer
4 Stream feeding mode
5 Auto power shut- off mode
6 Resolution of AUTO &
MANUAL mode
* Factory default settings are indicated with an asterisk (*).
5
Press the start (
entered value will be stored.
To change the setting or to set another mode, press the clear (
to step 2.
6 Press the light (

DISPLAYING TOTAL NUMBER OF COPIES

Use the following procedure to display the total number of copies.
1
Press the clear (
2
Press and hold down the clear (
copies will appear in two steps, each with three digits.
Example: Total number of copies is 1,234.
4-4
SPECIAL FUNCTIONS
Mode
0 -> OFF, 1 -> 10 sec., 2 -> 30 sec., *3 -> 60 sec.,
4 -> 90 sec., 5 -> 120 sec.
*0 -> 30 sec., 1 -> 60 sec., 2 -> 90 sec.
0 -> 2 min, *1 -> 5 min., 2 -> 15 min., 3 -> 30 min.,
4 -> 60 min., 5 -> 120 min.
0 -> OFF, *1 -> ON
0 -> OFF, *1 -> ON
*0 -> 300 dpi, 1 -> 600 dpi
) key. The right-hand number in the display will be steadily lit and the
) or dark ( ) key to return to the normal copy mode.
) key to reset the display to zero.
) key for approximately 5 seconds. The total number of
) key. The entered parameter
Parameters
) key. The unit will return