Dc-In Power Connector: Pwr1; Serial Ata Power Connector: Pwr2 - VIA Technologies EPIA-P720 User Manual

DC-In Power connector: PWR1

EPIA-P720 has an onboard DC-In 2-pin power connector to
connect the DC-In power cable.
Pin Signal
1 DC In (+12V)
2 GND

Serial ATA Power connector: PWR2

The mainboard supports a 3-pin SATA power connector for SATA
power cable. Plug the SATA power cable into the SATA power
connector. Make sure the power plug is inserted in the proper
orientation and pins are aligned.
Pin Signal
1 +5V
2 +12V
3 GND
11