Table of Contents
Advertisement
M
S
ANAGING
WITCH
4.1.4 Configuring the System
Changing Device Name
1. Select the device to configure by clicking on it.
2. In the Configuration Area, select System tab.
3. Locate the Device Name field, and enter a device name.
4. Click Apply to configure the device.
The device name is changed.
Setting Modbus/TCP Idle Time
1. Select the device to configure by clicking on it.
2. In the Configuration Area, select the System tab.
3. Locate the Modbus/TCP Host Idle Time(s) field.
4. Enter a variable representing the idle time for the Modbus/TCP host function.
ProView provides the following information to SCADA through Modbus/TCP.
Vendor Name
Production Name
67
Figure 4-9. Changing Device Name
Advertisement
Table of Contents
