Discovering Switches; First Time Installation - Advantage EKI-5000 Series User Manual

M S
ANAGING WITCH

4.1. Discovering Switches

4.1.1 First Time Installation

Enabling ProView Function
See "Enabling ProView Function" on page 49 for further information.
Configuring Network Settings
EKI Device Configuration Utility provides two ways to configure network settings: DHCP +
Auto IP Settings or Static Settings.
DHCP + Auto IP Settings
1. Select Ethernet under the desired device.
2. Click the drop-down menu to select DHCP + Auto-IP.
3. Click Apply to confirm the settings.
Static Settings
1. Select Ethernet under the desired device.
2. Click the drop-down menu to select Static IP.
3. Enter the IP Address, Subnet Mask and Gateway.
59
Figure 4-1. Selecting Networking Setting