Federal Communication Commission Interference Statement; Declaration Of Conformity - Advantage EKI-5000 Series User Manual

Federal Communication Commission Interference
Statement
For further certification information, please go to www.advantech.com

Declaration of Conformity

CE
This product has passed the CE test for environmental specifications when shielded cables
are used for external wiring. We recommend the use of shielded cables. This kind of cable is
available from Advantech. Please contact your local supplier for ordering information.
This product has passed the CE test for environmental specifications. Test conditions for
passing included the equipment being operated within an industrial enclosure. In order to
protect the product from being damaged by ESD (Electrostatic Discharge) and EMI leakage,
we strongly recommend the use of CE-compliant industrial enclosure products.
FCC Class A
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference when the equipment is operated in a commer-
cial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Warnings for Class 1 Division 2
The following statements are required to appear for Class 1 Division 2 requirements
These devices are open-type devices that are to be installed in an enclosure with tool
removable cover/door that is suitable for the environment.
WARNING -This equipment is suitable for use in Class I, Division 2, Groups A, B, C, and D
or non-hazardous locations only.
WARNING - EXPLOSION HAZARD - Do not connect or disconnect equipment unless
power has been removed or the area is known to be non-hazardous."
WARNING - EXPLOSION HAZARD - Substitution of any components may impair suitability
for Class I, Division 2."
AVERTISSEMENT - Ce équipement est adapté à une utilisation en Classe I, Division 2,
Groupes A, B, C, et D ou non dangereux.
AVERTISSEMENT - RISQUE D'EXPLOSION - Ne pas brancher ou débrancher l'équipe-
ment que l'alimentation a été retiré ou la région est connue pour être non dangereux ".
AVERTISSEMENT - RISQUE D'EXPLOSION - Remplacement de tous les composants peut
nuire à la conformité de Classe I, Division 2."
iii