Table of Contents
Advertisement
Table 3-3. Utility Settings > Device Manager (Continued)
Item
Check device alive every X
second
Mark device as lost contact
after retry for X times
Unsigned Hardware Installation
Automatic answer for
unsigned hardware
installation
OK
Cancel
Apply
3.5.2 Management Menu
Table 3-4. Management
Item
Configuration Wizard
Clear Device List and
Search Again
Search Again
Add IP Address to Favorite
Search for a Range of IP
Addresses
Manual Direct Mapping
Virtual COM Port
3.5.3 Help Menu
Table 3-5. Help
Item
Check Utility Update
About
Enter a value to specify the time to check device alive.
Enter a value to specify the time to mark device as lost contact.
Check the checkbox to enable or disable answer automatically for
unsigned hardware installation.
Click OK to save and exit the utility setting.
Click Cancel to discard the changes.
Click Apply to save the utility setting.
Start the software wizard (setup assistant) to leads you through the
VCOM configuration process for device server product.
Clear all device list and re-search devices.
Re-search devices.
Add one device to Favorites.
Add a group of device to Favorites.
Click to add a target by selecting a Device Type and inputting the IP
address, physically connecting the serial device server to the
network is not required.
Select to update configuration utility.
Select to show the information about the configuration utility.
C
ONFIGURATION
Description
Description
Description
U
TILITY
56
Advertisement
Table of Contents
