Table of Contents
Advertisement
8. Click the Enable ProView Features radio button and click Apply to configure the device.
The ProView function is enabled and the switch can be configured.
3.3. Installing the Configuration Utility
Microsoft .NET Framework version 2.0 or greater is required for this application.
1. Insert the Advantech EKI Device Configuration Utility CD-ROM into the CD-ROM drive
(whereas E:\ is the drive name of your CD-ROM) on the host PC.
2. Use Windows explorer or the Windows Run command to execute the setup program,
the path for the setup program on the CD-ROM is as follows:
E:\EKI_Device_Configuration_Utility_v1.70.exe
3. If there is an existing COM port mapping utility on the host PC, remove it at this time. A
system reboot may be necessary before continuing the installation.
Figure 3-1. Enabling ProView Features
C
U
ONFIGURATION
TILITY
50
Advertisement
Table of Contents
