General Notes Of Caution - extronics iSCAN201 User Manual

1.3 General notes of caution

Caution / Notes
Notes on installation
Operating Instructions_iSCAN201_001
 The devices may only be operated when fully assembled.
 In hazardous areas, the devices must not be wiped or cleaned with a dry
cloth.
 The device must be switched off immediately if it is likely that it can no
longer be operated safely as a result of damaging impact or general
peculiarities (such as ingress of water or other fluids, temperatures outside
of the specified range, etc.).
 General statutory requirements or health and safety rules and accident
prevention guidelines and environmental laws must be adhered to (e.g. the
German Occupational Health and Safety regulation).
 Users must not open the device.
 Users must not make any changes to the device. Components may not be
exchanged or replaced. If non-specified components are used, explosion
protection is no longer guaranteed.
 Ensure safe handling with firm footing and sufficient room for movement.
 If the enclosure is in any way damaged the device must be removed from
the hazardous area immediately.
 In accordance with IEC 60079-19 and IEC 60079-17, operators of electrical
installation in hazardous areas are obliged to have them serviced by
qualified electricians.
 Do not insert any sharp objects into the enclosure or any other openings of
the handheld barcode scanner. Any openings at the device may not be
covered or blocked.
 The device and any accessories must be properly disposed of, i.e. as
legally specified, for example by a certified company.
 Electrical plants are subject to certain regulations concerning installation
and operation (e.g. RL 99/92/EG, RL 94/9EG, or the national rules such as
IEC 60 079-14 and VDE 0100).
 In the hazardous area it is the operator's responsibility to carry out any
repair and maintenance in compliance with applicable rules.
4