Step-By-Step Guide On Installation And Operation; Preparation Handheld Iscan201 Scanner For System Assembly 1 And 2 - extronics iSCAN201 User Manual

4 Step-by-step guide on installation and
operation

4.1 Preparation handheld iSCAN201 scanner for system assembly 1 and 2

Operating Instructions_iSCAN201_001
Do not replace batteries in hazardous areas.
Incorrect handling may result in the termination of the operating
permit.
The battery compartment is located at the bottom of the scanner.
Loosen the screw to remove the lid.
Open the battery compartment
After the screw has been loosened, the removal of the
lid requires a certain amount of force.
An iSCAN201BATT is required to operate the scanner.
Only use this battery for the Bluetooth Scanner.
Before placing the battery inside the scanner, remove its protective
cap.
12