Table of Contents
Advertisement
CHANGE PIN
The PIN code is a four-digit number that you can select and use to
protect against unauthorised use of certain functions.
1. Press Menu.
2. Scroll through using
3. Enter the default PIN for the base station (default PIN: 1590).
4. Now scroll through using
5. You will now need to enter the new PIN you wish to use and
press OK.
6. Now re-type your new PIN and press OK to confirm selection.
PLEASE NOTE!
If you forget your PIN you may need to return the unit to D-Link in order for the unit to
be reset. So please write this PIN down in a safe place for further use.
BS DEFAULT
This function will return the factory default settings to the base station.
Base station registrations will not be affected.
1. Press Menu.
2. Scroll through using
3. Enter your current base station PIN code (default PIN: 1590).
4. Now scroll through using
5. Press OK to confirm the selection.
PLEASE NOTE!
This will reset all settings in the unit. All user configurations will need to be reconfigured
after a BS Default is completed.
28
BS Setting
or
to BS Setting. Press OK.
or
to Change PIN. Press OK.
or
to BS Setting. Press OK.
or
to BS Default. Press OK.
www.dlink.com.au
Advertisement
Table of Contents
