MAKING A VOIP CALL
1. Enter the required telephone. Mistakes can be erased by
pressing the Clear button.
2. Press
VoIP service.
3. Press
MAKING A PSTN CALL
1. Enter the required telephone. Mistakes can be erased by
pressing the Clear button.
2. Press
PSTN.
3. Press
RECEIVING A VOIP OR PSTN CALL
1. Wait for the handset to ring. The indicator light on the handset
will flash.
2. Press
3. Press
PLEASE NOTE!
During a call you change the volume as shown in the Volume Control section.
If the telephone cannot connect to a line, you may not hear any dial tone on the handset
at all. The problem may be due to the batteries running low, the handset being too far
away from the base station, loss of Internet connection or all of the transmission
channels are being engaged.
10
Operation
and the telephone number will now be dialled via the
to terminate the call.
and the telephone number will now be dialled via the
to terminate the call.
or
to answer the incoming VoIP or PSTN call.
to terminate the call.
www.dlink.com.au