Download Print this page

D-Link DPH-C160S User Manual

D-link dect cordless voip phone handset + base station.
Hide thumbs

Advertisement

Advertisement

   Also See for D-Link DPH-C160S

   Related Manuals for D-Link DPH-C160S

   Summary of Contents for D-Link DPH-C160S

  • Page 2: Table Of Contents

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Contents CONTENTS .................... 2 PACKAGE DETAILS................4 ................4 ONTENTS OF ACKAGE ........... 4 YSTEM EQUIREMENTS FOR ONFIGURATION PRODUCT FEATURES................5 DECT FEATURES..................5 INTRODUCTION..................5 BASE UNIT CONNECTIONS..............6 BASE UNIT LEDS................... 7 HANDSET BUTTONS AND FUNCTIONS ...........

  • Page 3

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Tools > Firmware..................50 Tools > Time ....................51 Tools > Reboot ....................52 Status > Device Info ..................53 Status > Stats .....................54 Status > Diagnostics ..................55 Help > Help....................56 ............56 OW TO...

  • Page 4: Package Details

    Note: Using a power supply with a different voltage rating than the one included with the DPH-C160S will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller. System Requirements for Configuration...

  • Page 5: Product Features

    Speakerphone Hands-free dialling Introduction The D-Link DPH-C160S DECT Cordless VoIP Phone links traditional telephony networks to IP networks with a built in DECT Cordless Phone. It can reduce long distance phone charges and deliver toll-quality voice communication over the IP network. This device provides one loop start Foreign Exchange Subscriber (FXS) port, one PSTN failover port and one Ethernet port.

  • Page 6: Base Unit Connections

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Base Unit Connections The Ethernet Port (LAN) is auto MDI/MDIX, meaning you can use either connect a straight-through or crossover Ethernet cable. Phone Connection MAC Address Factory Reset Connect to your existing...

  • Page 7: Base Unit Leds

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Base Unit LEDs VoIP/PSTN LAN LED An active LED indicates a A solid LED indicates an VoIP session has been Ethernet link has been established. established. The LED will blink when there is activity on...

  • Page 8: Handset Buttons And Functions

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Handset Buttons and Functions Ear Speaker High quality speaker for privately hearing telephone calls. Another, larger speaker is on the rear of the handset for use as a speakerphone On Hook...

  • Page 9

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Up Arrow Use this button to open the Contact List when the Handset is idle. Pressing this button during a call will increase the volume. Down Arrow Menu/OK Use the button to open...

  • Page 10: Installing Batteries Into The Handset

    Installing Batteries into the Handset You must install three AAA NiMN batteries (included in the package) into the DPH-C160S handset and charge them in the base for about 12 hours before you can use your new DPH-C160S DECT Cordless VoIP Phone.

  • Page 11: Charging The Handset

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Charging the Handset Please Note: Before you use the Handset for the first time, you should full charge the new batteries for about 12 hours. After the initial charging, the Handset will recharge much more quickly ...

  • Page 12: Using The Handset

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Using the Handset Icons that indicate the The LCD display of the DPH-C160S handset can operation of the display various icons (at the top of the display) handset are shown in...

  • Page 13: Turning The Handset On And Off

    In the case shown above, the display indicates that this is handset 1 (HS 1) and base 1 (Base 1). When the DPH-C160S has contacted the SIP server and becomes registered, the name of the SIP service provider will be displayed, as shown below.

  • Page 14: Making A Call To The Pstn (regular Telephone Network)

    Making a Call to the PSTN (regular telephone network) If you have connected your PSTN telephone line to the DPH-C160S’s Base, you can make a telephone call to any regular telephone using the PSTN normal telephone usage charges will apply  by following these steps: Pick up the handset and press the PSTN Dial Tone button.

  • Page 15: Making A Call To The Pstn In Standby Mode

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Making a Call to the PSTN in Standby Mode If you have connected your PSTN telephone line to the DPH-C160S’s Base, you can make a telephone call to any regular telephone using the PSTN normal telephone usage charges will apply ...

  • Page 16: Receiving A Call

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Receiving a Call When an incoming PSTN or VoIP telephone call is detected, the handset will ring and the L1 icon will be displayed in the LCD. If the caller can be identified, the caller’s number or Buddy List entry will be displayed.

  • Page 17: Last Number Redial

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Last Number Redial The handset stores the last three telephone numbers you have dialled. To view and retrieve the last three numbers you have dialled, press the Scroll Up button. To scroll through the list, press the Scroll Up button repeatedly.

  • Page 18: Using The Speakerphone

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Using the Speakerphone While making a call, you can engage the handset’s built in speaker to make both ends of the conversation audible to several people on your end of the line.

  • Page 19: Adjusting The Volume Level

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Adjusting the Volume Level While making a call, you can adjust the earpiece volume level from 1 to 9. A higher number indicates a higher volume level. To adjust the volume level, press the Scroll Up or Scroll Down button during a telephone call.

  • Page 20: Connecting The Dph-c160s To Your Network

    Figure 1: Possible Network Configurations How to Obtain the DPH-C160S’s IP Address: You can dete rmine the IP address of your DPH-C160S at any time by pressing IP/OK button followed by **1 (that is ‘star star one’ on the cordless handset).

  • Page 21: Connecting/activating Your Voip Service

    Connecting/Activating your VoIP Service The first step in connecting your new DPH-C160S DECT Cordless VoIP Phone to your VoIP Service Provider is to open your web browser and navigate to the VoIP Service Providers website (you may even find a detailed leaflet inside the box with this product with more details on the activation of your account if it is not already activated).

  • Page 22: Configuring The Dph-c160s For Use With Your Voip Service Provider

    Password as “admin” This will now open the DPH-C160S’s web-based configuration menu. The first step is to configure the DPH-C160S to use the VoIP Service. Click the Advanced tab and then click the VoIP button in the left hand menu.

  • Page 23

    VoIP Service Provider. To save the changes click the Apply button. The following dialog box will open to prompt you to restart the DPH-C160S DECT Cordless VoIP Phone to make your new settings take effect. Page 23 of 67...

  • Page 24

    VoIP Service Provider. This means that the DPH-C160S DECT Cordless VoIP Phone has now been registered with the VoIP Service Provider. You should see this image (right) on the LCD when the DPH-C160S is registered with the VoIP Service Provider.

  • Page 25: Using The Web Interface

    Ethernet router in the Address field. How to Obtain the DPH-C160S’s IP Address: You can determine the IP address of your DPH-C160S at any time by pressing the IP/OK button followed by **1 (that is ‘star star one’ on the cordless handset).

  • Page 26: Web Interface Menu Items

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Web Interface Menu Items Below we will cover all of the possible features under each menu item within the Web Interface. Home > LAN > Dynamic IP Address Dynamic IP Address Choose Dynamic IP Address to obtain IP Address information automatically from your router/gateway.

  • Page 27

    DPH-C160S and may be changed. MAC Address The default MAC Address is set to the LAN’s physical interface MAC address on the DPH-C160S. It is not recommended that you change the default MAC address unless required by your network administrator.

  • Page 28: Home > Lan > Static Ip Address

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Home > LAN > Static IP Address Static IP Address Choose Static IP Address if all LAN IP information is provided to you by your network administrator. You will need to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your network administrator.

  • Page 29

    DPH-C160S – DECT Cordless VoIP Phone – User Manual the same subnet mask.) Default Gateway Input the IP address of the router/gateway to which you are connecting. Primary DNS Address Input the primary DNS (Domain Name Server) IP address provided by your ISP.

  • Page 30: Advanced > Voip > Server Configuration

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Advanced > VOIP > Server Configuration The DPH-C160S must be configured with your VoIP Service Providers server details in order to establish a connection and make calls. Page 30 of 67...

  • Page 31

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Server FQDN Use this drop-down menu to Enable or Disable the Server Fully Qualified Domain Name (FQDN) function. This is disabled when the SIP URL domain name is different from the SIP proxy server domain name.

  • Page 32

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Refresher the session refresh. uac – specifies the Caller side will initiate the session refresh. uas – specifies the Call receiver (the “Callee”) will initiate the session refresh. Codec Priority &...

  • Page 33: Advanced > Voip > Provisioning

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Advanced > VOIP > Provisioning Provisioning is a function that automatically updates your DPH-C160S’s VoIP configuration by using a TFTP server located on the Internet. If you have accesses to such a service, you will need to know the URL and Proxy Address of the Provisioning Server.

  • Page 34: Advanced > Voip > Stun Configuration

    RTP media to successfully traverse a NAT without requiring any configuration changes on the NAT. STUN is useful if you need to use the DPH-C160S behind a modem or router that provides the connection to your ISP and then to the Internet and does not...

  • Page 35

    DPH-C160S – DECT Cordless VoIP Phone – User Manual support symmetric NAT. You will need access to a STUN server on the Internet and its IP address to use STUN on the DPH-C160S. STUN State Use this drop-down menu to Enable or Disable STUN on the router.

  • Page 36: Advanced > Voip > User Agent

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Advanced > VOIP > User Agent The User Agent page allows you to configure your VoIP Account Information to connect to the VoIP Service Provider Phone Number The telephone number assigned to your account.

  • Page 37

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Authentication The Username used to access the VoIP Service Provider ser vice Username Password The Password used to access the VoIP Service Provider service Retype Passwor Retype your password to confirm.

  • Page 38: Advanced > Voip > Peer To Peer

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Advanced > VOIP > Peer to Peer This page allows you to configure your device to make direct calls to another VoIP device via an IP address. Index This field specifies the settings to the information entered in the...

  • Page 39

    DPH-C160S – DECT Cordless VoIP Phone – User Manual User Agent. Phone Number The telephone number assigned to this entry. User IP Address Enter the IP address of the remote peer in this field. Port Enter the UDP port number the remote peer will use to make the connection in this field.

  • Page 40: Advanced > Voip > Telephony

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Advanced > VOIP > Telephony his page allows configuring some of the more advanced features for your VoIP onnection. TMF Method Out-of band Dual Tone Multi-frequency – The Dual Tone Multi- frequency (DTMF) mode sets how the router will handle the tones that your telephone makes when you push its buttons.

  • Page 41

    DPH-C160S – DECT Cordless VoIP Phone – User Manual when you are not speaking. Country Code Allows you to set the country code settings – default setting is for Australian tones. Block Outgoing Caller When Enabled this will block your Outgoing Caller ID so that when you make a call it will make you appear to be an anonymous caller.

  • Page 42: Advanced > Voip > Call Forwarding

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Advanced > VOIP > Call Forwar ding This page will a llow y ou to configure methods for which you can relay calls to a different number. See below for more d etails.

  • Page 43

    DPH-C160S – DECT Cordless VoIP Phone – User Manual No Answer Timer This is the delay for the No Answer feature before calls are relayed to the No Answer Number. Page 43 of 67...

  • Page 44: Advanced > Voip > Speed Dial/contact List

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Advanced > VOIP > Speed Dial/Contact List his page allows you to configured a Speed Dial and Contact List for making alls quickly from your handset. Page 44 of 67...

  • Page 45

    DPH-C160S – DECT Cordless VoIP Phone – User Manual peed Dial State This will enable the Speed Dial function on the DPH-C160S. This field specifies the settings to the information entered in th below table. Dial Code The Dial Cod e will be the number that you use for the Speed Dial feature to engage the required Index.

  • Page 46: Advanced > Misc

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Advanced > Misc. This page al lows you to configure the ToS / Diffserv settings for your network. oS Type This allows you to select to use Type of Service (ToS) or Diffserv for the QoS feature.

  • Page 47: Tools > Admin

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Tools > Admin This page allows you to change the password used to access the web interface, type the New Password and Confirm Password to be certain you have typed it correctly.

  • Page 48

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Old Password Enter the old password in order to confirm that you are an Administrator. New Password Enter the password here and the same password in the Confirm Password field. This will be the password that the administrator will use to gain access to the configuration menu of the device.

  • Page 49: Tools > System

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Tools > System This screen all ows yo u to backup and restore configuration files. Click Backup to initiate the backing up of a configuration file. Click Upload to initiate the...

  • Page 50: Tools > Firmware

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Tools > Firmware You can upgrade the firmware of the DPH-C160S here. Make sure the firmware you want to use is on the local hard drive of the computer. Please check the D- Link Support site for firmware updates at http://www.dlink.com.au/tech.

  • Page 51: Tools > Time

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Tools > Time The Router provides a number of options to maintain current date and time including SNTP. NTP Server This will be the IP Address of ei ther an Internet or LAN based SNTP Server.

  • Page 52: Tools > Reboot

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Tools > Reboot Restart Device Click the Reboot button to restart the DPH-C160S with the latest changes made to the configuration. Page 52 of 67...

  • Page 53: Status > Device Info

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Status > Device Info This page displays the current information for the DPH-C160S. It will display the LAN Information statistics. This window will show the DPH-C160S’s working status: LAN MAC Address: MAC address of the DPH-C160S.

  • Page 54: Status > Stats

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Status > Stats The DPH-C160S keeps a running log of statistics and activities occurring on th DECT Cordless VoIP Phone. If th e device is rebooted, the statistics are utomatically cleared.

  • Page 55: Status > Diagnostics

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Status > Diagnostics The DPH-C160S all ows you to run a basic network diagnostic PING to etermine if there is a network connection. The best check that can be done is to enter your router/gateway’s IP address to see if there is a connection...

  • Page 56: Help > Help

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Help > Help The Help tab will give basic information referring to various screens located in the DPH-C160S interface. To vi ew a specific section, click on its hyperlinked ame. A new window will appear with the required information.

  • Page 57: Technical Specifications

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Technical Specifications Ethernet Ports One Port for Fast Ethernet RJ-45, Auto MDI/MDI-X, 10/100 Connections Mbps Standard Compliance IEEE 802.3 for 10 Mbps Ethernet IEEE 802.3u for 100 Mbps Ethernet Rate Adaptation...

  • Page 58

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Height 110mm Weight 312g Regulatory EMC, Safety, Model No, Serial No, MAC Address Label On rear of Base Unit POWER REQUIREMENT: External Power Adapter AC Power Adapter, AC 9V, 1A On rea...

  • Page 59

    DPH-C160S – DECT Cordless VoIP Phone – User Manual EMI CERTIFICATION: FCC Class B BSMI Class B CE Class B ENVIRONMENTAL SPECIFICATIONS: Operating Temperature 0° to 40°C Storage Temperature -10° to 55°C Operating Humidity Range 5 to 95%, Non-condensing Page 59 of 67...

  • Page 60: Appendix

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Appendix Configuring your PC’s IP Address In order to configure your system to recei e IP settings from the Router it must first have the TCP/IP protocol installed. If you have an Ethernet port on your computer, it probably already has TCP/IP protocol installed.

  • Page 61

    DPH-C160S – DECT Cordless VoIP Phone – User Manual 2. In the Control Panel window, click Network and Internet Connections. Click Network and Internet Connections. 3. In the Network and Internet Connections window, click Network Connections. Click Network Connections. Page 61 of 67...

  • Page 62

    DPH-C160S – DECT Cordless VoIP Phone – User Manual 4. In the Netwo rk Connections window, right-click on Local Area Connection , then click Properties. Right-click on the Local Area Connection icon and selec t the Properties option from the pull-d menu.

  • Page 63: Windows 2000 Ip Protocol

    DPH-C160S – DECT Cordless VoIP Phone – User Manual 6. Select “Obtain an IP address automatically” by clicking once in the circle. Click the OK button. Select Obtain an IP address automatically in the Internet Protocol (TCP/IP) Properties window. Your comput er is now ready to use the Router’s DHCP server.

  • Page 64: Configure Windows 2000 For Dhcp

    DPH-C160S – DECT Cordless VoIP Phone – User Manual 7. Select Internet Protocol (TCP/IP) in the Network Protocols li st, and then click OK. 8. You may be prompted to install files from your Windows 2000 installation CD or other media. Follow the instructions to install the files.

  • Page 65: Configure Windows Me For Dhcp

    DPH-C160S – DECT Cordless VoIP Phone – User Manual figure Windows ME for DHCP 1. In the Control Panel window, double-click the Network and Dial-up Connections icon. 2. In the Network and Dial-up Connections window, r ight-click the Network i con, and then select Properties.

  • Page 66

    DPH-C160S – DECT Cordless VoIP Phone – User Manual 6. Double-click OK to confirm and save your changes. You will be prompted to restart Windows. 7. Click Yes. When it has re started, your computer is ready to use the Router’s DHCP server.

  • Page 67: Technical Support

    DPH-C160S – DECT Cordless VoIP Phone – User Manual Technical Support You can find software updates and user docume ntation on the D-Link website. D-Link Australia 1 Giffnock Avenue North Ryde, NSW 2113 Sydney, Australia TEL: +61-2-8899-1800 FAX: +61-2-8899-1868 Australia: 1300-766-868...

Comments to this Manuals

Symbols: 0
Latest comments: