Table of Contents
Advertisement
To enable the use of more than one handset a registration has to be
performed. Every new additional handset must be registered in order
to use the current base station; each base station can handle up to 4
handsets.
On registration, the handset is allocated a handset number for use on
the new base station, the handset numbers are 1-4.
1. Press Menu.
2. Scroll through using
3. Select the base station (1, 2, 3 or 4) you wish to register using
or
4. Enter the current base station PIN code (default PIN: 1590).
Press OK.
5. After a few seconds (no more than 90) all unused handset
numbers are displayed. Select one of these (usually the lowest
displayed number) by pressing the corresponding keypad
button.
30
HS Register
. Press OK.
or
to HS Register. Press OK.
www.dlink.com.au
Advertisement
Table of Contents
