Download  Print this page

Voice-activated Recording; Backlight On/off; Changing The Contrast; Displaying The Recording Time - Philips DPM 9450 User Manual

Digital pocket memo.
Hide thumbs

Advertisement

Voice-activated recording

The DPM supports the voice-activated recording mode.
This is the menu entry for voice-activated recording; a check mark next to the symbol indicates that voice-
activated recording is enabled. The symbol always shows the current setting:
Confirm the menu entry selection by pressing the Jog Dial and do the following:
Enable voice-activated recording:
Disable voice-activated recording; this is the default setting:
Confirm the setting by pressing the Jog Dial and to return to the DPM main menu.
For more information on the voice-activated recording mode, refer to the Voice-activated recording section in
this manual.

Backlight on/off

The DPM provides a backlit display for improved visibility.
This is the menu entry for the display backlight; a check mark next to the symbol indicates that the backlit display
function is enabled. The symbol always shows the current setting:
Confirm the menu entry selection by pressing the Jog Dial and do the following:
Enable the backlight; this is the default setting. When you press a button on the DPM, the DPM display will be
backlit for about eight seconds:
Disable the backlight; this setting guarantees a longer lifetime for the DPM's batteries:
Confirm the setting by pressing the Jog Dial and to return to the DPM main menu.

Changing the contrast

You can change the contrast setting for the DPM display.
This is the menu entry for the contrast setting:
Confirm the menu entry selection by pressing the Jog Dial.
The DPM provides seven contrast levels, from low contrast
setting is level 5:
Confirm your preferred contrast setting by pressing the Jog Dial; this also returns you to the DPM main menu.

Displaying the recording time

The DPM enables you to have an additional time displayed for the recording time. Depending on the setting which
has been made in SpeechExec Dictate you will either see the used-up recording time or the remaining recording
time. This time display also depends on the setting for the recording format (SP/LPm).
Note: The recording time is only displayed if you have set the Advanced display option for the DPM appearance
in SpeechExec Dictate.
This is the menu entry for the remaining recording time setting; the check mark next to the symbol indicates
that this additional time is currently displayed on the DPM:
This is the menu entry for the used-up recording time setting; the check mark next to the symbol indicates that
this additional time is currently displayed on the DPM:
To disable the display of this additional time, confirm the menu entry selection by pressing the Jog Dial. Move the
Jog Dial to have the symbol without the check mark and confirm your changes by pressing the Jog Dial again.
You will return to the DPM main menu.
DPM 9450 - User Manual
.
to high contrast
12
. The default

Advertisement

Table of Contents

   Also See for Philips DPM 9450

Comments to this Manuals

Symbols: 0
Latest comments: