Voice-Activated Recording; The Listen In Function; Automatic File Splitting; Backlight Time - Philips VTR8010 User Manual

audio cable (audio equipments such as radio, CD, VCD, DVD
etc.). Use the stereo audio cable provided with the device
to connect the audio equipment's audio output with "Line
in" jack of the device. The recording operation is the same
as recording with microphone. Before recording with Line
in jack, please adjust the volume of the sound source to a
suitable level, otherwise the recorded sound may lack fidelity.

(4)Voice-activated Recording

This is a practical function of recording, no button operation
is needed. When the function is enabled, in the course of
recording, if no voice is detected, the device will automatically
pause recording after 3 seconds; if voice is detected again, the
device resumes recording. See the below related reference
picture:

(5)The Listen In function

64 EN
After activating the Listen In function, you can connect an
earphone to listen if there's any sound input. See the Listen in
function setting interface picture as follows:

(6)Automatic file splitting

When recording, the device will automatically save the
recording file every 30 or 60 minutes, and then continue the
recording. See the below related reference picture:

(7)Backlight Time

The backlight time function can be set at: 15, 30, 45, 60