Toshiba e-studio 2330c Imaging Manual page 218

* The color to be adjusted varies according to the color (color to be used for the area other than black)
selected in the Twin-color mode. Refer to the table below and select the color to be adjusted.
Selected color
Red
Green
Blue
Cyan
Magenta
Yellow
* "Halftone" refers to how halftones are printed. Two options are available: "Smooth" which is intended to
improve the reproducibility of gradation and "Detail" which is intended to print halftones in detail (with
the high frequency).
The halftone option to be applied in printing can be selected from among the "Halftone" options on the
printer driver (Windows) or in the print dialog box (Macintosh).
"Auto" is selected from among the "Apply to" options by default. It is intended to automatically select
"Smooth" or "Detail" in accordance with "Apply to" of the halftone option, the selected "Color" and
"Image Quality Type" options, as described by the table below.
Apply to
General
Text Detail
Graphic
(Illustration, Smooth
line, etc.)
Image
(Photograph, Smooth
etc.)
* The subcode varies depending on the area where the density is adjusted. Refer to the table below and set
the subcode for the area to be adjusted.
Subcode
0
1
2
<Note>
This adjustment changes the values set in the MFP. Therefore, it will affect every user who uses
the printer by connecting it to the MFP. After the adjustment, the values changed will be applied
to all printouts for the "Image Quality Type" and "Halftone" options. (For instance, if the value
for [05] code for Smooth is changed, it will be applied to printing performed with Halftone =
"Smooth" (or "Auto") selected.) Carefully perform the adjustment, being aware that the image
quality of all future printouts will be changed, when printing out originals other than the one that
is used for the adjustment.
Precautions after the completion of the adjustment
If "White" is selected in the Twin-color mode, all areas other than black will not be printed. White toner will not
be used to print these areas.
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
Color to be adjusted
Y (Yellow)
"Color" and "Image Quality Type" options
Auto/Color
Photograph Presentation
Detail
Smooth
Smooth
Area where the density is adjusted
Low-density area
Medium-density area
High-density area
3-99
3. Printer-specific Adjustments
M (Magenta) C (Cyan)
Line Art
Detail Detail
Smooth Detail
Smooth Detail
© 2008 TOSHIBA TEC CORPORATION All rights reserved
Black and Twin
White Color
Detail Detail
Smooth Smooth
Smooth Smooth