To Program Frequently Used Copy Settings ( To Use Custom Mode ); To Adjust Custom Mode Settings In Black Mode - Toshiba e-studio 2330c Imaging Manual

2.18 To Program Frequently Used Copy Settings
Explanation
Five original modes (Text/Photo, Text, Printed image, Photo and Map) are available for the color modes and
four original modes (Text/Photo, Text, Photo and Image smoothing) are available for the black mode by default.
However, a new original mode adjusted to be able to satisfy the user's particular requests about image quality
can be added as a "custom" mode. One custom mode can be added for each of the color and black modes. For
users who frequently use the special type of originals or who are not satisfied with the image quality of the
existing original modes, it is recommended to register a set of copy settings that satisfy the user's particular
requests as the custom mode.
* The custom mode is made by adjusting image quality based on the Text/Photo mode, according to originals to
be used. It is also available to use the custom mode as an independent original mode. This means that the
change of the setting values in the custom mode does not affect each default original modes.
Procedures
The adjustment procedure differs depending on whether in the black mode or the full color mode the settings in
the custom mode are adjusted. Ask the user which mode he or she uses and then refer to the procedure that is
more suitable for his or her request.

2.18.1 To Adjust Custom Mode Settings in Black Mode

* All the steps in the adjustment procedure shall be performed by the service technician.
(1) Enter the setting mode [08]. Change the value for the code [508] to enable the functions of the custom mode
in the black mode.
Value for 08-508
0
1
* The default adjustment value for the custom mode is preset at the one that reproduces image quality
equivalent to that of the Text/Photo mode in the black mode at the shipment.
After setting the value, go to the next step.
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
Custom mode for black mode
Unused
Used (Text/Photo base)
2-71
2. Copier-specific Adjustments
(To Use Custom Mode)
© 2008 TOSHIBA TEC CORPORATION All rights reserved