Toshiba e-studio 2330c Imaging Manual page 15

1. General Adjustments – Copying, Printing and e-Filing (Output from Box)
(1) Enter setting mode [08]. Change the value to adjust the density of a solid area during the copying/printing
operation.
• Use steps (a) to (c) to perform the adjustment.
(a) Enter setting mode [08]. Change the values for codes [2513 to 2515] to adjust the developer bias
output value.
• Decreasing the value will make the solid colored area become lighter (decrease the amount of toner
on the solid colored area). On the other hand, increasing the value will make the solid colored area
become darker (increase the amount of toner on the area).
* The value to use varies according to the paper type and color to adjust. Check the code to use in
accordance with the following "Code" list, and refer to the "Value" list to select a proper value.
Code
Paper type
Full color
Black
Value
Value
0
1
2
3
4
5
6
7
8
9
10
<Hint>
Adjust the values for the following codes, in order to adjust colors with RGB.
Adjustment of R (Red):
Adjustment of G (Green): Adjust Y (Yellow) and C (Cyan).
Adjustment of B (Blue):
(b) Enter adjustment mode [05]. Select code [396]. Press the [START] button.
• Image quality control will be forcibly performed and the image density will be corrected.
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
Color to adjust
Y (yellow)
M (magenta)
Plain paper
C (cyan)
K (black)
Y (yellow)
M (magenta)
Thick
C (cyan)
K (black)
Correction value for developer bias
output
Value automatically set −100
Value automatically set −80
Value automatically set −60
Value automatically set −40
Value automatically set −20
Value automatically set
Value automatically set +20
Value automatically set +40
Value automatically set +60
Value automatically set +80
Value automatically set +100
Adjust Y (Yellow) and M (Magenta).
Adjust M (Magenta) and C (Cyan).
1-6
[08] code
08-2513
08-2514
08-2515
Density of the solid colored
© 2008 TOSHIBA TEC CORPORATION All rights reserved
Subcode
0
1
2
3
0
1
2
3
---
area
Light
↑
↑
↑
↑
↑
Default
↓
↓
↓
Dark