Toshiba e-studio 2330c Imaging Manual page 141

3. Printer-specific Adjustments
(2) Enter the adjustment mode [05]. Change the values for codes [8210] to [8212] and [8249] to [8254] to adjust
the judgmental threshold for the "Pure Black and Gray" setting.
Original
PDL
mode
Text
PS Graphics
Image
Text
PCL Graphics
Image
Text
XPS Graphics
Image
Subcode Image Quality Type
0
1
2
3
4
* If the default value is "1", change the "Pure Black and Gray" setting to "Off" on the Color Settings menu
of printer driver since no value smaller than 1 is provided.
When "Text, Graphic & Image" is selected for the "Apply to" setting on the printer driver setting menu,
photo areas whose colors are close to black may be treated as black because the larger the value is, the
wider the area to be printed only with K toner becomes. Therefore adjust the value carefully while
checking the copied image.
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
[05] code Subcode
8252 0/1/2/3/4
8253 0/1/2/3/4
8254 0/1/2/3/4
8210 0/1/2/3
8211 0/1/2/3
8212 0/1/2/3
8249 0/1/2/3/4
8250 0/1/2/3/4
8251 0/1/2/3/4
General
Photograph
Presentation
Line Art
Advanced
3-22
Recommended Acceptable
value value range
Default 1 to 255
Default 1 to 255
Default 1 to 255
Default 1 to 255
Default 1 to 255
Default 1 to 255
Default 1 to 255
Default 1 to 255
Default 1 to 255
© 2008 TOSHIBA TEC CORPORATION All rights reserved
Default
8/8/8/8/8
1/1/1/8/1
1/1/1/8/1
8/8/8/8
1/1/1/8
1/1/1/8
8/8/8/8/8
1/1/1/8/1
1/1/1/8/1