Toshiba e-studio 2330c Imaging Manual page 108

To increase the sharpness intensity
* This adjustment is effective when you want to copy light text, thin lines or illustrations more clearly.
(a) Enter the adjustment mode [05]. Change the value of the code [922] to adjust the default value for
the sharpness intensity.
Color mode
Black
<Note>
If the setting value is too large, Moiré may appear.
To copy text or lines more clearly
(a) Enter the adjustment mode [05]. Increase the value for the code [925] to make the text and lines
darker (improving faint text or thin lines).
Original mode
User custom
<Note> If the setting value is too large, the life of consumables may be shortened.
To adjust copy density
(a) Enter the adjustment mode [05]. Change the value for the codes [931] and [940] to adjust the copy
density. The larger the setting value is, the darker the image becomes. The smaller the setting value is,
the lighter the image becomes.
Base
original
mode
Text/Photo
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
Original mode [05] code
User custom 05-922
Recommended
[05] code
Set a value larger than
05-925
Density mode [05] code
Automatic 05-940
Manual 05-931
2-73
2. Copier-specific Adjustments
Recommended
value
Set a value larger
than 128.
(129 to 228)
Acceptable
value range value
0 to 4
2.
Recommended value
Set a value smaller than
128 to make the image
darker.
Set a value larger than
128 to make the image
lighter.
© 2008 TOSHIBA TEC CORPORATION All rights reserved
Accepta
ble
Default
range
value
0 to 255 128
Default
2
Accepta
ble
Default
range
value
0 to 255 128