Periodic Inspection - TOHATSU EverRun MX 18E2 Owner's Manual

40
INSPECTION AND MAINTENANCE

2. Periodic inspection

It is important to inspect and maintain your outboard motor regularly. At each interval on
the chart below, be sure to perform the indicated servicing. Maintenance intervals should
be determined according to the number of hours or number of months, whichever comes
first.
For periodic inspection and maintenance, consult your servicing dealer.
Item
*Carburetor
Fuel filter
Fuel System
Piping/Hose
Fuel tank
Spark plugs
Ignition
*Ignition
timing
Starting
Starter rope
System
Propeller
Lower Unit Gear oil
9
*Water pump
Bolt and Nuts
Sliding and Rotating Parts.
Grease Nipples
Outer Equipment
Anode
*Have this handled by your dealer.
Servicing Interval
10 hours or 50 hours or
1 month 3 months
 
 



 
 
 

 

 

Every 100
Action
hours or
6 months
 Strip, clean and adjust.
Adjust idling.
 Check and clean or Replace
if necessary.

Check and Replace if
necessary.

Clean.
Check gaps. Remove

carbon deposits or Replace
if necessary.

Adjust timing.

Check for wear or damage.

Check for bend blades,
damage, wear.

Change or replenish-oil and
check for water leaks.

Check for wear or damage.

Retighten.

Apply and pump in grease.

Check for corrosion.

Check for corrosion and
deformation.
Note
Your outboard motor should receive careful,
and complete, inspection at 300 hours. This
is the best time for major maintenance pro-
cedures to be carried out.
Remarks
Replace impeller
every 12 months.
Replace if necessary.