Stopping - TOHATSU EverRun MX 18E2 Owner's Manual

Note
Idle speed may be higher during warming
up of engine. If shifted to Forward or
Reverse during warming up, it may be diffi-
cult to shift back to neutral. In such case,
stop engine, shift to neutral, and restart
engine to warm up.
Note
Frequent shifting to forward or reverse can
accelerate wear or degradation of parts. In
such case, replace gear oil earlier than the
period specified.
ENGINE OPERATION

4. Stopping

Stop switch lock
Stop switch
Hook
1
Turn the throttle grip to the slow posi-
tion.
2
Put the shift lever in the Neutral position.
Run the engine for 2-3 minutes at idling
speed if it has been running at full
speed.
3
Push the stop switch to stop the engine
or release the stop switch lock.
WARNING
 Do not shift into Reverse during planing,
or control will be lost leading to serious
personal injury, boat may swamp, and/
or hull may be damaged.
 Do not shift into Reverse during cruis-
ing, or control may be lost, falling down
or causing passenger(s) to be thrown
overboard. Leading to serious personal
injury, and steering system and/or shift-
ing mechanism may be damaged.
25
5