Table of Contents
Advertisement
CONTROL
The CONTROL menu is used for setting the key inhibit function.
Sub Menu
CONTROL
-KEY INHIBIT
If the key inhibit has been turned on, the Inhibit lamp on the front panel always lights in orange.
When you press any of the buttons except power, menu and volume, the prompt box will display on the
screen as follows, and the other button functions are not valid. (Only if the Menu button is pressed,
∨
(up),
(down) and Enter button will be valid. )
The only menu setting can be changed when the key inhibit is engaged is the KEY INHIBIT ON/OFF
item. To change any of the items, turn the key inhibit to OFF first.
LMW-171 SERIES LCD MONITOR
state, and open circuit corresponds to a HIGH
state. This mode requires to the UMD tally mode
parameter to be set.
IMAGE VIDEO 422: Use the setting to
control tally state via 422 port. GPI toggle is no
available.
STANDARD +IV422: OSD and LED tally
setting are the same as STANDARD and IMAGE
VIDEO 422. This mode requires to the UMD tally
mode parameter to be set. User can set the OSD
tally level via 422 port.
TSL: Use the TSL 422 setting to control OSD
and LED tally via the TSL serial protocol.
Settings
Explanation
OFF/ON Inhibit all keys except power, menu and volume keys
KEY
INHIBIT
—28—
User Manual
∧
Advertisement
Table of Contents
