Table of Contents
Advertisement
（8）ASPECT Button/lamp
Press to set the aspect ratio of the picture, 4:3 or 16:9.
Scaled mode only effects for SD signal. For VGA, DVI and HD input signal, it is not valid and is
defaulted to 16:9 mode.
When the 4:3 mode is set, the button lamp lights and this status can be saved.
Note: For the available input signals of the ASPECT Button, see the description of "4.5 Input
Signals and Adjustable/setting Items" on this chapter.
（9） SCAN Button/lamp
Press to change the scan size of the picture between normal (100% picture) and over (95%
picture). For VGA and DVI input signal, it is not valid and is defaulted to normal mode.
When the OVER mode is set, the button lamp lights and this status can be saved.
（10）F1-F6 Button/lamp
F1-F6 can be used as quick-button.
You can turn the assigned function on or off.
When the button is pressed, the button lamp will light up. However, in some cases, the button
lamp will not light up.
When the assigned function is set to be "OFF" in the main menu and the corresponding
button is pressed, the button lamp will not light up.
In the quick-button function menu, when the character color is blue, the corresponding
button lamp will not light up.
You can assign each button function on the third page of USER CONFIG menu.
When the current menu is not the main menu, press to call out the quick-button function
menu, the selected item displays in yellow. Execute the function which is selected in
USER CONFIG page 3 menu. If set operating, the button lamp will be lighted.
When the current menu is the main menu, press to execute the function which is selected
in USER CONFIG page 3 menu. If set operating, the button lamp will be lighted.
However, it can not call out the quick-button function menu.
The factory setting is as follows.
The quick-button function menu disappears automatically if it is not operated for 5 seconds.
Note:
For the quick-button function menu, the button function is valid if the character color is white.
The button function is not valid if the character color is blue.
（11）STATUS: Status Indication Button
Press to display the status menu. When the main menu is on, this button is unavailable.
(For more information, see the STATUS menu of chapter 6).
LMW-171 SERIES LCD MONITOR
Tab. The Quick-button Function Menu
F1
F2
AUDIO METER
F3
H/V DALAY
F4
F5
F6
BLUE ONLY
—11—
MARKER
NATIVE
AUTO ADJ
User Manual
Advertisement
Table of Contents
