Input Signals And Adjustable/Setting Items - OSEE LMW-171H User Manual

(16) CONT Knob
Displays and adjusts the picture contrast value:
1. Press this knob to display the picture contrast value.
2. Adjust the knob clockwise, the value increases. Adjust the knob counter-clockwise, the value
decreases. The adjusted value will be saved.
3. If the adjustment function is enabled and left unattended, the menu automatically disappears after
3 seconds.
4. When the current value of saturation is not the default setting value (50), the indicator lamp
above the knob will light. Return the value to the default settings (50), the indicator goes out.
5. Adjustment values range: 0-100.
(17) Volume Knob
Displays and adjusts the speaker volume value; and enables/disables speaker mute function:
1. Press this knob to toggle mute on/off. If toggled to the mute function, the indicator lamp above
the knob will light. At the same time, the icon"MUTE"will display on the right bottom of the
screen. To cancel this function, press VOLUME knob again. At the same time, the indicator
lamp above the knob will go out and the icon"MUTE"will disappear.
2. Turning the knob will toggle to the speaker volume function and adjust the speaker volume value.
Adjust the knob clockwise, the value increases. Adjust the knob counter-clockwise, the value
decreases. The adjusted value will be saved. If the adjustment function is enabled and left
unattended, the menu automatically disappears after 3 seconds.
3. Volume adjustment range is 0-30. ( 0: stand for close the audio but not mute mode)The default
value is 15.
Note: For VGA or DVI-D input signal, there is no audio.

4.5 Input Signals and Adjustable/setting Items

Item
Video ;
Y/C
Contrast YES
Bright YES
Chroma YES
Phase NTCS
NTSC Setup NTSC
Compo
SMPTE
Level
Color Temp YES
SCAN YES
ASPECT YES
MARKER YES
BLUE ONLY YES
MONO YES
H/V DELAY \
DOT PHASE \
H Position
\
V Position \
Audio Ext
Time Code \
UMD YES
Audio Meter YES
"YES": Adjustable/can be set; "\" : Not adjustable/cannot be set
LMW-171 SERIES LCD MONITOR
Input signal
YPbPr SD YPbPr HD
YES YES
YES YES
YES YES
\ \
\ \
480I60 SMPTE
YES YES
YES YES
YES \
YES YES
YES YES
YES YES
\ \
\ \
\ \
\ \
Ext Ext
\ \
YES YES
YES YES
—13—
SDI SD SDI HD HDMI
YES YES YES
YES YES YES
YES YES YES
\ \ \
\ \ \
SMPTE SMPTE SMPTE
YES YES YES
YES YES YES
YES \ SD/YES
YES YES YES
YES YES YES
YES YES YES
YES YES \
\ \ \
\ \ \
\ \ \
Ext/Ebd Ext/Ebd Ext/Ebd
YES YES \
YES YES YES
YES YES YES
User Manual
DVI VGA
YES YES
YES YES
\ \
\ \
\ \
\ \
YES YES
FULL FULL
\ \
\ \
\ \
\ \
\ \
\ YES
YES
\
\ YES
\ \
\ \
\ \
\ \