Configuring Ethernet Settings - Canon MF8580Cdw User Manual

Configuring Ethernet Settings

Ethernet is a standard for communicating data in a local area network (LAN). You can set the communication
mode (half-duplex/full-duplex) and the Ethernet type (10BASE-T/100BASE-TX). In general, the machine can
be used without changing the defaults (
suit your network environment.
1
Press .
2
Use / to select <Network Settings>, and press
If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press
Machine
3
Select <Ethernet Driver Settings>
4
Select whether to configure Ethernet settings automatically or manually.
Configuring Ethernet settings automatically
Select <On>, and press
be used.
Configuring Ethernet settings manually
1
Select <Off>, and press
2
Select the communication mode.
Select <Communication Mode>
<Half Duplex>
Alternately sends and receives communication data. Select when the machine is connected to a networking device using
half duplex.
<Full Duplex>
Simultaneously sends and receives communication data. Use this setting for most environments.
3
Select the Ethernet type.
Select <Ethernet Type>
4
Press <Apply>.
5
Restart the machine.
Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.
<Auto Detect>.
. The machine detects and automatically sets the communication mode and the Ethernet type that can
.
select <Half Duplex> or <Full Duplex>
select <10BASE-T> or <100BASE-TX>
Ethernet Driver Settings), but you can change these settings to
.
.
0ALJ-08S
. Logging on to the
.