Configuring the Machine for Scanning to Shared Folders
Before configuring the machine for scanning to shared folders, check the setup flow shown below.
Make sure that the machine and the computer are correctly connected.
Make sure that you have the following information:
NOTE:
For instructions on how to create a new shared folder, see Send Setting Guide (included with the User
Software CD-ROM).
Make sure that the computer meets the following system requirements for the Send Function
Setting Tool:
NOTE:
Also make sure that <Use HTTP> and <Remote UI On/Off> are set to <On>.
Communication
Set the machine configuration.
Connecting via Wireless LAN (MF8580Cdw / MF8280Cw Only)
Connecting via Wired LAN
The IP address of the machine
The name of the computer where the shared folder is located
Path to and the name of the shared folder (If access restrictions are set to the folder, the user name and
password information is also needed)
Operating system
Windows XP/Vista/7/8/Server 2003/Server 2008/Server 2012
Web browser
Microsoft Internet Explorer 7.0 or later
Display
SVGA monitor (with at least 800 x 600 pixel screen resolution) that supports at least 256 colors
Disabling Remote UI
Viewing Network Settings
Setting a Shared Folder as a Save Location
Viewing the Computer Name
Disabling HTTP
0ALJ-08J