Canon MF8580Cdw User Manual page 517

If this setting moves any of the print data outside the printable area, the portion outside the printable area will not be
printed.
<Printer Settings>
value <Apply>
Offset Long Edge (Back)
Specify the print position by setting the offset value for the long edge on the back side of the paper. Increasing the value moves the
print position downward. Decreasing the value moves the print position upward.
-50.0 to ±0 to +50.0 (mm)
IMPORTANT
If this setting moves any of the print data outside the printable area, the portion outside the printable area will not be
printed.
<Printer Settings>
<Apply>
*
Auto Error Skip
Select whether to automatically perform error skip to bypass errors and continue printing when an error occurs with the print data. If
<Off> is selected, you can perform error skip by using the operation panel.
Off
On
NOTE
Error skip bypasses errors in print data, so the document may not be printed correctly.
You can manually perform error skip.
(Status Monitor)
<Printer Settings>
*
Timeout
<Layout>
<Layout>
<Copy/Print Job> <Job Status>
<Auto Error Skip>
<Offset Short Edge (Back)>
<Offset Long Edge (Back)>
Select the document containing errors
Select <Off> or <On>
Specify the offset
Specify the offset value
<Skip Error>