Canon MF8580Cdw User Manual page 516

the print position to the right. Decreasing the value moves the print position to the left.
-50.0 to ±0 to +50.0 (mm)
IMPORTANT
If this setting moves any of the print data outside the printable area, the portion outside the printable area will not be
printed.
NOTE
You can specify this setting in combination with the <Offset Long Edge (Front)>, <Offset Short Edge (Back)>, and <Offset
Long Edge (Back)>. By specifying all four settings, for example, the print position is shifted as shown in the illustration
below.
If the offset settings are specified in combination with the <Gutter> setting, the specified values are added together.
<Printer Settings>
value <Apply>
Offset Long Edge (Front)
Specify the print position by setting the offset value for the long edge on the front side of the paper. Increasing the value moves the
print position downward. Decreasing the value moves the print position upward.
-50.0 to ±0 to +50.0 (mm)
IMPORTANT
If this setting moves any of the print data outside the printable area, the portion outside the printable area will not be
printed.
<Printer Settings>
<Apply>
Offset Short Edge (Back)
Specify the print position by setting the offset value for the short edge on the back side of the paper. Increasing the value moves
the print position to the right. Decreasing the value moves the print position to the left.
-50.0 to ±0 to +50.0 (mm)
IMPORTANT
<Layout> <Offset Short Edge (Front)>
<Layout> <Offset Long Edge (Front)>
Specify the offset
Specify the offset value