Canon MF8580Cdw User Manual page 259

To switch a scanner
If two or more machines are installed and you want to switch to another machine, click [Settings], and select the machine.
Configuring Settings for MF Toolbox and the Scanner
6
Configure the scan settings as necessary.
7
Click [Start].
Scanning starts.
To cancel, click [Cancel].
When placing documents in the feeder in step 1
When scanning is complete, the scanned document is saved to a folder on a computer or forwarded to an application.
Configuring Storing Settings
When placing documents on the platen glass in step 1
If the screen shown below is displayed, you can continue scanning documents (When you can only scan one page at a
time, such as when the JPEG format is specified, this screen is not displayed.)
1
If there are additional pages of documents to be scanned, place the next document on the platen glass,
and click [Next].
Repeat this step until you finish scanning all of the pages.
When there is only one page to be scanned, proceed to the next step.
2
Click [Finish].
When scanning is complete, the scanned document is saved to a folder on a computer or forwarded to an
application.
Data
NOTE
If the scanning results are not achieved
If the expected scanning results are not achieved, for example, if the image is too dark or the color tone is different from that in
the original, you can configure advanced scan settings with ScanGear MF. Place the document again, select the [Display the
Scanner Driver] check box on the screen in step 6, and click [Start] to start ScanGear MF.
Configuring Scan Settings in MF Toolbox
Specifying External Applications to Forward Scanned Data
Configuring Storing Settings Specifying External Applications to Forward Scanned