Table of Contents
Advertisement
Configuring the Machine for Scanning to Shared
Folders
Before configuring the machine for scanning to shared folders, check the setup flow shown below.
Network
Make sure that the machine and the computer are correctly connected.
Connecting to a Wireless LAN(P. 418)
Connecting to a Wired LAN(P. 417)
Make sure that you have the following information:
●
The IP address of the machine.
●
The name of the computer where the shared folder is located.
Computer Name(P. 891)
●
Path to and the name of the shared folder (If access restrictions are set to the
folder, the user name and password information is also needed).
●
For instructions on how to create a new shared folder, see "Send Setting Guide."
Make sure that the computer meets the following system requirements for the
Send Function Setting Tool:
●
Operating system
Windows Vista/7/8/Server 2003/Server 2008/Server 2012
●
Web browser
Microsoft Internet Explorer 7.0 or later
●
Display
SVGA monitor (with at least 800 x 600 pixel screen resolution) that supports at
least 256 colors
●
Also make sure that <Use HTTP> and <Use Remote UI> are set to <On>.
Disabling HTTP Communication(P. 567)
Disabling Remote UI(P. 568)
Set the machine configuration.
Location(P. 475)
474
Viewing Network Settings(P. 445)
Setting a Shared Folder as a Save
0Y9U-080
Checking the
Advertisement
Table of Contents
