Pro-Form 440R User Manual page 17

MAINTENANCE AND TROUBLESHOOTING
MAINTENANCE
Inspect and tighten all parts of the rower regularly.
Replace any worn parts immediately.
To clean the rower, use a damp cloth and a small
amount of mild detergent, iMPORTANT: To avoid
damage to the console, keep liquids away from
the console and keep the console out of direct
sunlight.
CONSOLE TROUBLESHOOTING
Most console problems are the result of low batteries;
for replacement instructions, see assembly step 15 on
page 12.
HOW TO GREASE THE PEDAL AXLE
If the pedals squeak when you use the rower, see
assembly step 12 on page 11. Remove the Right
and Left Pedals (30, 57), and apply a small amount
of the included grease to both sides of the Pedal Axle
(58). Then, reattach the Pedals.
HOW TO GREASE THE ROLLERS
If the rollers beneath the seat squeak when you use
the rower, apply a small amount of the included grease
to a paper towel, and spread a thin layer evenly along
the rail where the rollers move. Then, wipe off any
excess grease.
Rail
_rease
Roller
17